Blog

LA Gas Fitters Licensing Law up for amendment by the LA Heat Pump Association

by | Wednesday, April 18, 2018 |

Updated 5/17/18 Governor Edwards signed Senate Bill 482 proposed by the Louisiana heat pump Association allowing state-licensed air conditioning contractors to work on gas furnaces without having to obtain the state gas pipe fitters licensing. Those contractors that have already obtained the gas Fitters license will be able to continue under the grandfathering if they choose to continue having their employees follow the procedure set forth for training and testing. Those licensed HVAC contractors that do not intend to run gas line Beyond the unit disconnect towards the main gas meter in the home do not need to carry the gas Fitters license now. Updated 5/14/18 Gas Fitters Licencing Amendment expected to be signed by the Governor on Thursday 5/17/2018. Updated 5/10/18 There has been progress made in the Louisiana Gas Fitters Amendment, it is been passed through the Senate the House and has been confirmed by the senate committee yesterday. It is on the way to the Governor's desk for his signature now. Updated 5/8/18 The House voted 93-0 yesterday afternoon to pass the amendment SB482. There were some minor verbiage changes but nothing that changes the intent of the bill. There will be one more step for this bill prior to the Governors signature and that is the Senate concurrence on amendments. This step is expected to go back to the Senate later this week. Passage of this Bill will allow licenced HVAC contractors in the State of LA the ability to Install, Service, and Maintain, natural gas appliances and fuel connections from the outlet of the appliance shut off valve through the appliance without having to be licenced again under the Fuel Gas Fitters Licence. Updated 5/4/18 The debate of the bill has been postponed and is now expected to be heard on the house floor Monday (5/7/18). Please continue to contact your representatives and have them vote Yes on the SB 482 Amendment. Updated 4/30/18 Fuel Gas Fitters License Recent Changes to SB482 Your help is needed…Please take the time to support it Some recent changes over the weekend have shifted the date that SB482 will be debated on the House floor. The Bill is now scheduled to be debated on the House Floor May 3 2018. Now we need your help... The SB482 by Senator Riser and Representative Carmody will need your active support. Please start calling and emailing your Representatives to support what we are attempting to do. It is important to mention as it gets coded in favor to ask them to vote YES to the amendment. Updated 4/26/18 LA Gas Fitters Licensing Law up for amendment with SB 482 Proposed by LAHPA and Sponsored by Senator Neil Riser The proposed SB482 Sponsored by Senator N. Riser will go to the LA House floor for debate 5/1/18 If SB482 is passed it will allow Licensed HVAC and Mechanical contractors practicing HVAC, to work on the Natural gas appliance and the appliance connector from the outlet side of the appliance disconnect through the appliance. A LA Gas Fitters License would be required for anyone working on the pipe and fittings up to and including the appliance disconnect for the furnace. Both sides of this amendment seem to be in agreement with this version and it appears to this constituent that the bill will not meet strong opposition on the House floor. HVAC contractors, if this bill passes, will be able to continue connecting, disconnecting, servicing, and maintaining equipment, keeping intact the equipment warranty as they have done for many previous years. Vigilance must always stay top of mind of the common safety practices required on every fuel appliance service call. More as this Bill progresses. 4/18/18 LA Gas Fitters Licensing Law up for amendment by the LA Heat Pump Association Among much confusion concerning the recent implementation of the Fuel Gas Fitters licensing there have been new developments. The LA Heat pump Association introduced an amendment to the 2016 law requiring everyone who works on Natural gas appliances to obtain the the Fuel gas licensing. The proposed change to the law further defines the scope of the Gas Fitters License to that of the pipe and fittings up to and including the appliance shut off. This definition would now reestablish the HVAC contractor the ability to work on Natural Gas furnaces, including connection, disconnect, maintenance, or repair from the appliance shut off to the inlet of the appliance. The proposed amendment SB482 has passed out of the Senate 36-0 and passed the House committee yesterday and is on to the House floor soon. Please contact your representative to support the bill SB482 by Senator Riser. Also don't forget to contact his office and thank him for his support.

Read More


Duro Dyne's Warrior Wall

by | Wednesday, March 14, 2018 |

Duro Dyne allowed employees, friends, family & customers to submit names of heroes who have served or are serving & have a connection to Duro Dyne. This Warrior Wall banner was displayed at the AHR meeting in Chicago.

Coburn Supply is proud to see a familiar name on this banner. Noah Austin Kincel's name was among this list of heroes.

Noah is the son of Coburn's employee Rick Kincel (Tech Services) & the brother of Mike Kincel (Manager at Coburn's of Lafayette Downtown). He is 3rd generation Air Force & his family & Coburn Supply is very proud of his service.

Thank you to Duro Dyne Corporation for honoring our heroes!

#DuroDyneWarrior
#AHR2018
#CoburnSupply


Read More


Winter Carbon Monoxide Reminder

by | Friday, December 8, 2017 |

Winter Carbon Monoxide reminder,

As homes are being built tighter down in the Deep South the threat of trapping (CO) Carbon Monoxide in these homes has become increasingly real.

Our mindset has to change from the floor heaters we had all around grandma’s home venting into the rooms. Because new homes are tighter, the heater, water heater, stove, oven, fireplace, etc. are even more important to have checked out for a combustion analysis. Gone are the days of saying “It’s got a blue flame, it must be OK”

Our friends north of Interstate 40 have known about these issues for years and we are just beginning to see the effects of tighter, negative pressure, homes back drafting CO into the lives of our customers.

The states code require UL rated CO detectors in new construction homes but they will not alarm until they reach 70 parts per million (ppm). Even if you have a digital one UL restricts it from showing anything below 30 ppm. The problem with that is firefighters generally are required to don breathing apparatus at 25 ppm.

If you have a situation with a tightly constructed home with any fuel burning appliance in it, please consider the use of a Low Level CO detector such as the Defender LL6070 to help protect your customers from low level CO poisoning.

Rick Kincel
Tech Services

Read More


Gulfport helps local Elementary School

by | Friday, September 22, 2017 |

Coburn's of Gulfport recently helped DES DeLisle Elementary School in Delisle, Mississippi. After a bad thunderstorm passed through the town, it took out 19 compressors at this school on a Sunday night. In an effort to keep the school from having to close, they contacted Coburn's asking if there is anything they could do to help. Coburn's of Gulfport was able to allow them to rent portable AC Units. The units were delivered and placed in the classroom the next morning. The school was able to stay open on Monday without any interruptions.

Contact your local Coburn's location to see how we can help you!
www.coburns.com/locations







Read More