The Klein Tools 69409 Line Splitter separates hot from neutral and ground wires on standard 120-Volt outlets so that current measurements can be made with a current clamp. Without the Line Splitter, the current clamp measures the load current going in both directions, effectively cancelling the measurement. The Line Splitter has a standard measurement section and ten-times multiplier section for use with less accurate or higher ranged clamp meters. It was designed for use with Klein Tools clamp meters but will also function with many other manufacturers' clamp meters. Overall Width 2.28" (5.8 cm) Overall Height 4.67" (11.9 cm)Special Features Measures up to 15A with +/- 3% Accuracy Application Use with Klein Clamp Meters Weight 3.8 oz (109 g) Drop Protection 3.3' (1 m) Overall Length 4.67" (11.9 cm)
Brand: | Klein Tools |
Dimensions: | 4 in X 2.25 in X 9.25 in |
Height: | 1.7 |
Length: | 6.6 |
Material: | 600 Denier Nylon |
Type: | Meter |
Width: | 4.3 |
-
-
Dimensions: | 4 in X 2.25 in X 9.25 in |
-
-
-
-
-
-
-
-
-
-
-
-
-
Allows the measuring of current draw up to 15A without splitting the load's power cordFor use with all Klein clamp metersCan be used to perform voltage checks with standard multimeter probesProvides 10X measurement mode
*No pricing displayed?
If prices are still not showing online after logging in with your account number, it is due to vendor regulations. Those products can only be priced by contacting your local Coburn's location.
Out of Stock products
Please contact your local Coburn's location to find out if the item can be ordered from the manufacturer and the estimated time it would take to be shipped.
Coburn Supply has made every effort to display accurate information. We cannot guarantee the accuracy or completeness of the information, including price, images, spec, availability and services. Please review our Terms of use.
On certain products there is no guarantee that the manufacturer shown is the actual manufacturer of the product. Please contact your local Coburn's location if there is a requirement that the product comes from a specific manufacturer.