Service and Repair Fittings Products
Service Saddles and Tapping Saddles
AWWA service saddles and tapping saddles mount on the outside of a water main and provide a threaded outlet for a corporation stop. The saddle body sits on the pipe, straps or bolts secure it, and a gasket seals the contact area. Crews tap through the outlet to start a new service line.
Clamp Saddles and Saddle Accessories
Clamp saddles use a band or strap design that spreads clamping force around the pipe, giving broader contact where pipe material or wall condition calls for it. Saddle accessories supply the add-on and replacement parts used with saddle installations. Match each accessory to the saddle model and pipe size before ordering.
Tapping Sleeves
AWWA tapping sleeves enclose the full circumference of a main and provide a flanged or mechanical joint outlet for a tapping valve. As water main connection fittings, they handle larger branches than a saddle supports, such as new mains, fire lines, or large services. Related options appear under Saddles & Tapping Sleeves.
Repair Clamps
AWWA repair clamps seal leaks on water mains by wrapping a gasketed band around the damaged section and bolting it tight. They address pinholes, corrosion holes, and short cracks without cutting out pipe. Like other water main repair fittings, clamps are selected by measured pipe outside diameter and by clamp length.
Branch Pieces
AWWA branch pieces split one service outlet into two or more downstream lines, so several customers can be served from a single tap. They are common in new subdivision work and in water distribution maintenance, where fewer taps on the main means fewer potential leak points. Confirm inlet and outlet sizes before ordering.
Meter Setters
AWWA meter setters hold the water meter at a set height and alignment, connecting the incoming service line to the customer side. Many designs include an inlet valve and an outlet check valve or shutoff for meter changes. Pair them with Valves & Curb Stops and a matching meter box for a complete installation.
How It Works / Where to Use
Service Line Connections
Water service fittings link a customer's service line to the main. A service saddle or tapping saddle mounts on the main, a corporation stop threads into the outlet, and service tubing runs to the curb stop and meter. Every joint along this run must match the tubing type and size.
Water Main Repair
When a main leaks, a repair clamp seals the damaged area so crews can restore service without replacing a full pipe length. Water line repair fittings also support routine water line maintenance. Where a section must be cut out, Waterwork Couplings join the new pipe to the existing line.
Branch and Meter Installations
Branch pieces split one tap into multiple services for duplexes and tight lot layouts. Meter setters then position each meter for reading, testing, and replacement. Match each setter to the meter size and to the service tubing material at the inlet.
Key Specifications and Planning Steps
Pipe Size and Material
Measure the actual outside diameter of the main rather than relying on nominal size. Ductile iron, cast iron, PVC, steel, and asbestos cement pipe can share a nominal size but differ in outside diameter, so confirm the fitting's listed range covers the measured pipe.
Pressure and Specifications
Compare the manufacturer's rated working pressure with the system's operating and surge pressure. Review submittal data for body material, gasket compound, and outlet thread, and check each against the utility's material specification.
Planning Steps
Record pipe material, measured diameter, outlet size and thread, and service tubing type. Confirm specification approval, then order the fitting with any accessories the installation needs. Check excavation size as well, since it limits the room available to position and tighten the fitting.
Choosing the Right Service and Repair Fittings
Start with the job. New service taps call for a service saddle or tapping saddle sized to the main and outlet, while larger water main connections call for a tapping sleeve. Leaks call for a repair clamp long enough to cover the damage with margin on each side.
When stocking water line repair supplies, decide between repair and replacement by pipe condition. A clamp suits localized damage; widespread corrosion or repeated breaks point to replacing the section. Treat water line connection fittings the same way: match each to pipe material, size, and pressure. Keeping common sizes of service and repair fittings on hand shortens response time on emergency calls.
Frequently Asked Questions
Where can I buy AWWA service saddles and tapping sleeves for a water main job in the US?
Both are listed in this category of service and repair fittings under AWWA Service Saddles and AWWA Tapping Sleeves. Choose by the main's measured outside diameter, pipe material, and outlet size, and confirm each product against your utility's material specification.
What service and repair fittings should I stock on a utility truck for water main breaks?
A basic kit of water line repair supplies includes repair clamps in the main sizes your system uses, plus clamp saddles and service saddles with common outlet threads. Base quantities on the pipe sizes and materials in your service area.
What is the difference between a tapping sleeve and a tapping saddle on a water main?
A tapping saddle mounts on part of the pipe and provides a threaded outlet for service-size taps. A tapping sleeve encloses the full circumference and provides a flanged or mechanical joint outlet for a tapping valve, used for larger branch connections.
Should I use a repair clamp or replace the pipe section when a water main leaks?
A repair clamp suits localized damage such as a pinhole, corrosion hole, or short crack. Replace the section when corrosion is widespread, the pipe has repeated breaks, or the damage is longer than available clamp lengths.
What is the difference between a clamp saddle and a service saddle for water line work?
A service saddle provides a tapped outlet for connecting a service line to the main. A clamp saddle uses a band or strap design that spreads clamping force around the pipe. Pipe material, wall condition, and the required outlet decide which fits the job.
Which fitting should I use to add a new service line connection to an existing water main?
For typical service sizes, use a service saddle or tapping saddle. For larger water main connections, use a tapping sleeve. Match the fitting to the main's outside diameter, pipe material, and the thread of the corporation stop.
How do I fix a pinhole leak on a ductile iron water main fast?
Install a repair clamp sized to the main's measured outside diameter and long enough to cover the leak with margin on each side. Before installing, confirm the manufacturer lists ductile iron within the clamp's diameter range, as with any water main repair fittings.
What water line repair fittings work on cast iron, ductile iron, and PVC pipe?
Water line repair fittings are compatible when the pipe's measured outside diameter falls within the fitting's listed range and the manufacturer approves that pipe material. Cast iron, ductile iron, and PVC can differ in diameter at the same nominal size.
How do I measure a water main to order the right size repair clamp or saddle?
Wrap a tape around the pipe to get the circumference and divide by 3.1416, or use a pipe diameter tape. Compare the result to the fitting's listed range, and note pipe material and nominal size on the order.
What does an AWWA meter setter do in a water service installation?
A meter setter holds the water meter at a set height and alignment between the incoming service line and the customer line. Many designs include an inlet valve and an outlet check valve or shutoff, which simplifies meter testing and replacement.
What are water service fittings and how do they connect a home to the city water main?
Water service fittings link the main to the building. A saddle and corporation stop tap the main, service tubing runs to a curb stop, and a meter setter holds the meter, completing the water service connections to the property.
How do I confirm water main repair fittings meet my utility's material specifications?
Request the manufacturer's submittal data for the water main repair fittings you plan to use. Compare body material, gasket compound, coating, pressure rating, and any listed standards with the utility's specification or approved products list.
What is a branch piece used for in water distribution maintenance?
A branch piece splits one service outlet into two or more lines so several customers can be served from a single tap. In water distribution maintenance, this limits the number of taps on the main.
What are saddle accessories and when do I need them for a water main connection?
Saddle accessories are add-on and replacement parts used with saddle installations. Use them when a saddle on water main connection fittings work needs a component added or replaced on site, and match each part to the saddle model and pipe size.
How do I check that water line repair supplies are rated for my system's operating pressure?
Find the manufacturer's rated working pressure for each fitting and compare it with your system's normal operating pressure and expected surge pressure. Choose water line repair supplies rated above both, and confirm the rating meets the utility's specification.