Water Supply Pipe & Fittings
This range of water supply and pipe fittings covers PVC pressure pipe and restrained-joint pipe systems built for underground water mains and distribution lines. It includes AWWA C900 PVC pipe for potable water, Certa-Lok and Diamond Lok-21 restrained-joint pipe for thrust areas and trenchless installs, and Certa-Flo pipe for sewer lines. Each product line connects through gasketed bell and spigot joints that seal under pressure without solvent welding or fusion. Contractors, utility crews, and site engineers use this water distribution pipe on new municipal water systems, water main pipe replacements, and service extensions where the line runs below grade.
Choosing water supply pipe comes down to the project specification: pipe size, pressure class, joint type, and whether the local utility lists the product as approved. The sections below explain each product line, how the joints work, which specs to confirm, and how to select pipe for open-cut and directional drill installs.
Water Supply Pipe & Fittings
Water Supply Pipe and Fittings Products
Four product lines make up this category. Each serves a specific role in underground water infrastructure or nearby sewer work.
C900 PVC Pressure Pipe
C900 PVC pipe is manufactured to the AWWA C900 standard for PVC pressure pipe in water service. It comes in DR 14, DR 18, and DR 25 classes; a lower DR means a thicker wall and higher pressure capacity. Potable water pipe is blue. Each length joins through a gasketed integral bell, and NSF certification confirms drinking water suitability.
Certa-Lok Restrained Joint Pipe
Certa-Lok is a restrained-joint C900 PVC pipe system from Westlake Pipe & Fittings, previously marketed by CertainTeed and NAPCO. Precision-machined grooves and a nylon spline lock each joint and restrain it in both directions, so the pipe can be pushed or pulled. Joint options include RJ couplings and RJIB, a restrained joint integral bell. Joints assemble without fusion, which suits directional drilling and casing pulls.
Diamond Lok-21 Restrained Joint Pipe
Diamond Lok-21 is a factory restrained-joint C900 PVC pipe made by Diamond Plastics Corporation. Several utilities list it next to Certa-Lok on approved lists for proprietary restrained-joint C900 systems. Confirm it appears on the project's approved list before ordering.
Certa-Flo Restrained Joint Sewer Pipe
Certa-Flo is a Westlake PVC sewer pipe line that uses the Certa-Lok restrained joint integral bell. It serves sewer runs that need joint restraint. For potable water mains, specify C900 pipe instead.
Connecting to Fittings, Valves, and Restraints
Pipe in this category ties into water supply piping systems through companion products. Use Mechanical Joint & Flanged Fittings at bends, tees, and valves, Waterwork Couplings to join or repair runs, and Valves & Curb Stops to isolate sections. Saddles & Tapping Sleeves add service connections to existing mains.
How Water Main Pipe Works and Where to Use It
Gasketed Push-On Joints
Standard C900 pipe joins with a push-on joint. The spigot end slides into an integral bell that holds an elastomeric gasket made to ASTM F477. The gasket compresses between the bell and the pipe wall and seals the joint against line pressure, following the ASTM D3139 standard for plastic pressure pipe joints.
Restrained Joints and Thrust
Water pressure creates thrust at bends, tees, reducers, and dead ends, and that force can separate push-on joints. Restrained joint PVC pipe resists thrust at the joint itself. The alternative is a mechanical joint fitting secured with a wedge-style restraint gland from Waterworks Restraints, or thrust blocks where the utility allows them.
Installation Settings
Push-on C900 pipe suits open-cut trenches for new mains and replacements. Restrained-joint lines suit directional drill bores and casing pulls, where pipe must carry pulling force. Both serve potable water infrastructure across water distribution systems, from subdivision loops to city mains.
Key Specifications and Planning Steps
Specifications to Confirm
Before ordering water supply and pipe fittings, confirm nominal size, DR class and pressure rating, joint type (push-on, RJ coupling, or RJIB), AWWA C900 and NSF listing for potable service, and whether the product appears on the local utility's approved list. Also confirm gasket compatibility when connecting to fittings from another manufacturer.
Planning Steps
1. Confirm design pressure and pipe size from the project plans.
2. Select the DR class that meets that pressure with the required safety margin.
3. Mark every bend, tee, reducer, and dead end that needs restraint.
4. Assign restrained-joint pipe or restraint glands to those points.
5. Check local rules on joint deflection and marking tape. Some utilities cap deflection at 1 degree per joint and require tape over restrained pipe.
6. Order water main pipe and fittings together so joint components match.
Choosing the Right Water Supply Pipe and Fittings
Start with the application. For potable mains in open trenches, standard C900 pipe with gasketed bells covers most runs. Where water line pipe crosses under roads or waterways by directional drill, or needs restraint along a long stretch, Certa-Lok or Diamond Lok-21 removes the need for separate restraints at each joint. Certa-Flo fills that role on sewer lines. When weighing water main materials, C900 PVC resists corrosion and carries potable ratings, while some projects specify ductile iron, so follow the engineer's specification. Sourcing water line pipe and fittings from compatible systems reduces fit problems in the field, and matching water distribution materials to the utility standard keeps water supply and pipe fittings on track for inspection.
Frequently Asked Questions
Where can I buy C900 PVC water main pipe and restrained-joint fittings for a municipal water line project in the US?
Waterworks supply distributors carry C900 PVC pipe and restrained-joint systems such as Certa-Lok and Diamond Lok-21. This category groups that water distribution pipe with links to the fittings, couplings, valves, and restraints needed for work on municipal water systems.
What do I need to order to install a new underground water main: pipe, fittings, and joint restraints?
A typical order includes C900 or restrained-joint pipe sized to the plans, mechanical joint fittings for bends and tees, restraint glands or restrained-joint pipe at thrust points, isolation valves, and couplings for tie-ins. Ordering water main pipe and fittings together keeps joint components compatible.
How do Certa-Lok and Diamond Lok-21 restrained joint PVC pipe systems work, and how do I choose between them?
Certa-Lok locks each joint with a nylon spline set in precision-machined grooves, restraining it in both directions. Diamond Lok-21 is a factory restrained-joint C900 pipe from Diamond Plastics Corporation. Both appear on utility approved lists for restrained C900 systems, so choose based on the project specification and the local approved product list.
When is C900 PVC pipe used instead of ductile iron for a potable water main?
C900 PVC is often specified where corrosion resistance and NSF potable water certification are priorities, and where restrained-joint PVC can replace external restraints. Some projects still specify ductile iron. The engineer's choice of water main materials decides which applies.
Should I use restrained joint PVC pipe or mechanical joint restraints at bends and tees on a water main?
Both resist thrust. Restraint glands secure individual mechanical joint fittings and suit open-cut work with a limited number of restraint points. Restrained-joint pipe restrains every joint in a run, which suits long restrained lengths and trenchless installs. Many projects use both.
How do I keep PVC water main joints from pulling apart at fittings and dead ends under pressure?
Restrain the joints where thrust occurs: bends, tees, reducers, and dead ends. Use restrained-joint pipe through those areas, wedge-style restraint glands on mechanical joint fittings, or thrust blocks where the utility allows them. The restrained length comes from the project design.
What pipe can I pull through a directional drill bore for a water line without fusing joints?
Certa-Lok restrained-joint C900 PVC pipe is built for this. Its spline-locked joints carry pushing and pulling force, so sections assemble during pullback without fusion or solvent welding.
How do I choose the right DR rating for C900 PVC on a water distribution system?
Match the DR class to the system's design pressure. C900 is made in DR 14, DR 18, and DR 25, and a lower DR gives a thicker wall and higher pressure capacity. Confirm the class the utility specifies for water distribution systems in its area.
What fittings and joints do I need to connect C900 PVC water main pipe sections in a run?
Straight runs connect through gasketed integral bells or, on restrained lines, RJ couplings or RJIB joints. Bends, tees, and valve connections typically use mechanical joint fittings, and couplings handle repairs and tie-ins.
Which PVC pipe is approved for potable water mains, and what certifications should I check?
Check for AWWA C900 compliance, NSF certification for drinking water contact, and blue pipe color for potable service. Also confirm the product is on the local utility's approved list for potable water infrastructure.
What types of pipe and joint systems are used for water main pipe and fittings on municipal water systems?
This group of water supply and pipe fittings includes C900 PVC pipe with gasketed push-on joints and restrained-joint C900 systems such as Certa-Lok and Diamond Lok-21. Runs connect to mechanical joint fittings, couplings, and valves.
Why is water main PVC pipe blue, and does color matter on a job site?
Blue marks pipe for potable water, so crews and inspectors can tell drinking water lines from other utilities. Utility specifications commonly call for blue C900 pipe on potable mains and green pipe for sewer.
Is Certa-Flo PVC pipe meant for water lines or sewer lines?
Certa-Flo is a sewer product. Westlake lists it as a sewer pipe line that uses the Certa-Lok restrained joint integral bell. For potable water mains, use C900 pipe.
What should I check before buying PVC water supply pipe for an underground service or main?
Confirm size, DR class, joint type, AWWA C900 compliance, NSF certification, and the utility's approved list. Also check local rules on joint deflection and marking tape, and match water line pipe and fittings to the pipe's joint system.
How do push-on gasketed joints work on PVC water pipe, and when do they need extra restraint?
The spigot slides into an integral bell holding an ASTM F477 elastomeric gasket, which seals against line pressure. Push-on joints need added restraint at bends, tees, reducers, and dead ends, where thrust can separate them.
