High-Arc Faucets

High-Arc Faucet Products

High arc faucet designs differ by spray delivery, valve control, and installation location.

Pull-Down High-Arc Faucets

Pull-down models store the spray head at the spout tip and draw it straight down into the basin on a counterweighted hose. The tall arc lets the head reach both bowls of a double-bowl sink.

Pull-Out High-Arc Faucets

Pull-out models use a spray head that pulls toward the user rather than down, which suits filling containers on the counter. Many pull-out spouts sit lower than pull-down styles, so confirm clearance on the spec sheet.

Single-Handle High-Arc Faucets

Single-handle faucets regulate flow and temperature with one lever connected to a single cartridge or valve. They install in one hole or over a deck plate, and the lever can be moved with a wrist when hands are full.

Two-Handle and Bridge High-Arc Faucets

Two-handle faucets use separate hot and cold valves for finer temperature adjustment. Widespread versions need three holes, and many add a side sprayer in a fourth. Bridge faucets connect both handles to the spout through an exposed pipe above the deck.

Touch and Touchless High-Arc Faucets

Touch models start and stop flow when the spout or handle is tapped. Touchless models use a sensor that detects hand movement. Both operate a solenoid valve powered by a battery pack or plug-in adapter under the sink.

Bar and Prep High-Arc Faucets

Bar and prep faucets are compact high arc sink faucets built for secondary sinks on islands, wet bars, and pantries. They keep the tall spout profile for filling pitchers while fitting smaller basins and narrower decks.

How High-Arc Faucets Work and Where to Use Them

Spout Height and Sink Clearance

A high-arc spout typically places the aerator about 8 to 10 inches above the sink deck, compared with roughly 3 to 8 inches on low-arc models. The extra height directs water into deep basins and leaves working room under the outlet for tall pots, buckets, and large roasting pans.

Where High-Arc Faucets Fit

When specifying kitchen faucets for deep sinks, a tall spout matches the basin depth of undermount single-bowl, workstation, and apron-front sinks. High arc kitchen faucets also suit islands and peninsulas that have open space above the counter and no overhead cabinets.

Where a Lower Spout Works Better

A tall spout can block a window that starts just above the counter or strike upper cabinets and shelves. In shallow basins, water falls farther and splashes more. For these layouts, measure overhead clearance and sink depth first, or select a low-arc model from Kitchen & Bar Faucets.

Key Specifications and Planning Steps

Spout Height, Reach, and Swivel

Check three dimensions on the spec sheet: spout height from deck to aerator, reach from faucet centerline to aerator, and swivel range. Some models limit rotation so the spout cannot contact the backsplash, while others turn a full 360 degrees.

Mounting Holes and Deck Thickness

Common kitchen faucet mounting options include single-hole, three-hole, and four-hole decks. Single-hole models can cover extra holes with a deck plate, or the openings can hold a soap dispenser or side sprayer. Confirm the maximum deck thickness, especially on stone countertops.

Supply Connections

Inlet types vary by model. Many faucets use 3/8-inch compression connections, while others use 1/2-inch threaded shanks. Confirm the inlet on the spec sheet and match it with the correct Supply Lines before installation.

Flow Rate Limits

Federal standards cap kitchen faucet flow at 2.2 gpm at 60 psi. Some states, including California, set a lower mandatory limit of 1.8 gpm. These are legal limits; voluntary efficiency labels follow separate criteria.

Choosing the Right High Arc Kitchen Faucet

Start with the sink. Match spout height and reach to basin depth and bowl layout, then confirm overhead and backsplash clearance. Choose pull-down or pull-out spray based on sink size, and select handle type based on how the faucet will be operated. For touch or touchless models, plan an under-sink location for the power source.

High arc kitchen faucets are produced in standard kitchen faucet finishes such as chrome, stainless, matte black, and brushed gold. Match the finish to existing cabinet hardware and appliances. When comparing high arc kitchen sink faucets across kitchen sink faucet styles, check that replacement cartridges and sprayer parts are available through Kitchen Faucets Parts & Accessories.

Frequently Asked Questions

Where can I buy high arc kitchen faucets that fit the existing hole configuration on my client's sink?

This category lists high arc kitchen faucets for single-hole and multi-hole decks. Count the holes in the sink or countertop first. Single-hole models can cover two or three extra holes with a deck plate, while three-hole and four-hole models use separate handles or a side sprayer.

What finish options do high-arc faucets come in, and how do I match them to existing kitchen hardware?

High-arc faucets are made in common finishes including chrome, stainless steel, matte black, brushed gold, and bronze tones. Match the faucet to cabinet pulls, appliance trim, and drain hardware. Finish availability varies by model, so confirm the finish on the product listing.

 High arc vs. low arc kitchen faucet: which one should I install for a client?

A high-arc faucet places the aerator about 8 to 10 inches above the deck, while a low-arc faucet sits roughly 3 to 8 inches above it. Install a high-arc model when the client needs clearance for large cookware and the space above the sink is open. Install a low-arc model under a low window or overhead cabinet.

 Pull-down vs. pull-out high arc kitchen faucet: what is the practical difference?

A pull-down spray head drops straight into the basin from a tall spout, which suits deep sinks and double-bowl rinsing. A pull-out spray head pulls toward the user and suits filling containers on the counter. Pull-out spouts are often lower, so check spout height on the spec sheet.

Is a single-handle or two-handle high-arc faucet better for a busy kitchen?

A single-handle faucet controls flow and temperature with one lever and needs one hole, so it can be operated with a wrist when hands are full. A two-handle faucet gives finer temperature control through separate valves but needs three or more holes.

Will a high-arc faucet hit the window sill or upper cabinet above my sink?

It can. Measure from the sink deck to the bottom of the window sill, shelf, or cabinet, then compare that figure with the faucet's overall height on the spec sheet. Leave room for the spray head to dock and swivel. If clearance is tight, choose a low-arc model.

Why does my high arc kitchen faucet splash so much in a shallow sink?

Water from a tall spout falls farther before reaching the basin floor, and a shallow sink gives the stream less depth to absorb the impact. Switch to an aerated spray setting, reduce the flow, or pair the faucet with a deeper sink.

How do I install a single-hole high arc faucet on a sink with 3 or 4 holes?

Mount the faucet through the center hole and cover the outer holes with a deck plate sized to the sink's hole spacing. Unused holes can also hold a soap dispenser, side sprayer, or hole cover. Check that the deck plate matches the faucet finish.

What is the maximum deck thickness for mounting a high-arc kitchen faucet?

Maximum deck thickness varies by model and is listed on the manufacturer's spec sheet. It depends on shank length and mounting hardware. Measure the combined thickness of the sink and countertop before ordering, especially on stone or solid-surface tops.

How do I check whether a high-arc spout's swivel range will clear the backsplash?

Find the swivel range and spout reach on the spec sheet, then measure from the faucet hole centerline to the backsplash. If full rotation would bring the spout into the wall, select a model with a limited swivel stop or a shorter reach.

 What does high arc mean on a kitchen faucet and how tall is the spout?

High arc describes a deck-mounted faucet whose spout curves upward before turning down, placing the aerator about 8 to 10 inches above the sink deck. Overall faucet height is greater and varies by model.

What kind of faucet works for a deep kitchen sink and large stock pots?

Kitchen faucets for deep sinks should combine a tall spout with enough reach to center the stream over the drain. A high-arc pull-down model lets large stock pots fit under the aerator and directs the spray head down into the basin.

Are touchless high arc kitchen faucets worth it for a residential remodel?

Touchless faucets reduce handle contact during food prep and cleanup. They need a sensor, a solenoid valve, and a battery pack or plug-in adapter under the sink, which adds parts to service. Confirm cabinet space for the control box and, for plug-in units, a nearby outlet.

What maximum flow rate applies to a high-arc kitchen faucet, and how do mandatory limits differ from voluntary water-efficiency ratings?

Federal standards cap kitchen faucet flow at 2.2 gpm at 60 psi. Some states, including California, set a lower mandatory limit of 1.8 gpm. These are legal requirements. Voluntary labels follow separate criteria; the WaterSense program, for example, labels bathroom faucets, not kitchen faucets.

How do I confirm the supply line size and connection type before installing a high-arc kitchen faucet?

Check the inlet type on the faucet's spec sheet. Many models use 3/8-inch compression connections, while others use 1/2-inch threaded shanks. Measure the distance from the stop valve to the faucet inlet and select a supply line with matching ends and length.