Wall Mount Kitchen Faucet

Wall Mount Kitchen Faucet Products

Wall mount kitchen faucet styles differ by handle layout, spout type, and how the body connects to the wall. The groups below cover common wall mount faucet configurations.

Two-Handle Wall Mount Faucets

Two handle wall mount faucets use separate hot and cold valves on a two-hole layout, most often at 8-inch centers. Many use quarter-turn ceramic disc cartridges that are replaced from the front without opening the wall.

Wall Mount Bridge Faucets

A bridge faucet joins both handles with a horizontal bridge, and the spout rises from the center. Two supply arms extend from the wall, so the faucet still connects to a standard two-hole rough-in.

Adjustable Center Wall Mount Faucets

Adjustable center faucets use offset inlets that shift handle spacing across a set range, such as 7 to 9 inches. They are built for replacement work where existing stub-outs do not sit at an exact 8-inch spacing.

Wall Mount Faucets with Side Spray

A wall mount kitchen faucet with a sprayer adds a hand spray on a hose, mounted on the wall, the deck, or a holder on the faucet body. The sprayer reaches basin corners and rinses pots that do not fit under a fixed spout.

Wall Mount Pull-Down and Gooseneck Faucets

Pull-down models house the spray head in a high-arc spout and retract it on a hose. Gooseneck spouts add vertical clearance for stockpots. Confirm the spout height clears any shelf mounted above the sink.

Wall Mount Commercial Kitchen Faucets

Wall mount commercial kitchen faucets serve compartment, prep, and utility sinks in foodservice kitchens. Typical builds use brass bodies, swing spouts in several lengths, lever handles, and 8-inch centers. Pair them with matching commercial sinks and confirm lead-free certification.

How Wall Mount Faucets Work and Where to Use Them

How It Works

A wall mount kitchen faucet connects to supply pipes that run inside the wall and end at stub-outs or a rough-in valve set at the faucet's centers. The body threads onto these connections and seals against the finished wall with escutcheons. Each cartridge regulates flow and temperature, and the spout channels water into the basin.

Advantages and Disadvantages

Wall mounting clears the deck, keeps the faucet base out of standing water, and fits sinks with no faucet holes. The trade-offs are a rough-in that must be set before the wall is finished, harder access to supply connections, and wall repair if the faucet moves later. Exterior walls need freeze protection.

Where to Use

Common installs include kitchen remodels with open framing, apron-front and undermount sinks, deep single-bowl basins, commercial prep sinks, and bar sinks where counter depth is limited.

Key Specifications and Planning Steps

Specifications to Check

 Centers: the distance between inlet centers, commonly 8 inches, or an adjustable range.

 Supply connection: most models use 1/2-inch NPT inlets.

 Spout reach: measured from the finished wall to the outlet center, often 8 to 10 inches.

 Spout clearance: the height from the sink rim to the outlet.

 Flow rate: the federal limit for kitchen faucets is 2.2 GPM at 60 psi; California limits them to 1.8 GPM.

 Code: confirm lead-free certification and, in public kitchens, ADA-compliant lever handles.

Planning Steps

 1. Measure sink depth, rim height, and drain location.

 2. Review the faucet's rough-in sheet before framing.

 3. Set supply stub-outs at the listed centers and height with rough-in products, and add blocking behind the wall.

 4. Pressure test the lines before closing the wall.

 5. Finish the wall, mount the faucet, and seal the escutcheons.

 6. Flush the lines, check for leaks, and confirm the stream lands near the drain.

Choosing the Right Wall Mount Kitchen Faucet

Start with the plumbing on site. Where the wall is open or the sink has no deck holes, a wall mount kitchen faucet fits the layout. Where the wall is finished and the sink is drilled, a deck mount faucet takes less labor. Compare kitchen faucet mounting options against sink depth, then match spout reach to the drain position. When comparing wall mounted kitchen sink faucets, choose two handles for separate temperature control, a sprayer for large pots, or a commercial body for heavy use. Stock matching wall mount kitchen faucet parts for kitchen wall mount faucets and pair them with compatible kitchen and bar sinks.

Frequently Asked Questions

Where can I buy a wall mount kitchen faucet with 8-inch centers for a contractor job?

Plumbing supply distributors stock wall mount kitchen faucet models with 8-inch centers in two-handle, bridge, and commercial styles. Before ordering, check the rough-in sheet, inlet size, spout reach, and lead-free certification so the faucet matches the stub-outs on site.

What wall mount commercial kitchen faucets work for a restaurant prep sink?

Wall mount commercial kitchen faucets for prep sinks typically use brass bodies, 8-inch centers, lever handles, and swing spouts sized to reach the center of the bowl. Confirm lead-free certification for drinking water contact and check local health code requirements.

Is a wall mount or deck mount kitchen faucet better for a remodel?

Wall mount fits remodels where the wall is open and the sink has no deck holes, since supplies can be set at the faucet's centers before drywall. Deck mount fits when the wall is finished and the sink is drilled, because it installs from below without opening the wall.

Should I choose a bridge style or a standard two-handle wall mount faucet?

Both connect to a two-hole rough-in, most often at 8-inch centers. A bridge faucet links the handles with a horizontal bar and places the spout at the center, while standard two handle wall mount faucets mount the spout on a central body between the valves. Choose by spout height, reach, and kitchen style.

Is a fixed 8-inch center or an adjustable center faucet easier to install on existing plumbing?

An adjustable center faucet is easier when existing stub-outs are not exactly 8 inches apart. Its offset inlets cover a range, such as 7 to 9 inches, so it fits without opening the wall. A fixed 8-inch faucet needs stub-outs at that exact spacing.

How high above the sink should a wall mount kitchen faucet be installed?

Height comes from the faucet's rough-in sheet, measured from the sink rim to the center of the supply inlets. Set it so the spout clears the rim with room for pots and the outlet still lands over the drain. Check any shelf or cabinet above the sink for clearance.

What spout reach do I need over a deep basin?

Measure from the finished wall to the center of the drain and choose a spout reach close to that distance. Wall mounted kitchen sink faucets often list reach between 8 and 10 inches. Deep basins also need extra spout clearance so pots fit under the outlet.

What supply connection size do wall mount kitchen faucets use?

Most wall mounted kitchen faucets use 1/2-inch NPT inlets that thread onto stub-outs or wall elbows. Confirm the connection type on the spec sheet, since some models ship with their own rough-in valve or adapters.

What are the disadvantages of a wall mounted kitchen faucet?

The supply rough-in must be set before the wall is finished, connections are harder to reach for repairs, and moving the faucet later requires wall repair. Faucets on exterior walls also need freeze protection.

 How do I replace the cartridge on a two-handle wall mount faucet?

Shut off water to the faucet, which may require closing a branch or main valve, since wall supplies often lack under-sink stops. Remove the handle and bonnet nut, pull the cartridge, and install a matching replacement. Hot and cold cartridges may turn in opposite directions, so order them by model number along with other wall mount kitchen faucet parts.

What should I plan before installing a wall mount faucet in a kitchen remodel?

Choose the faucet before the wall closes. Review its rough-in sheet, set stub-outs at the listed centers and height, add blocking, and pressure test before drywall. Confirm sink depth and drain location so spout reach and clearance match.

Can I put a wall mount kitchen faucet with a sprayer on a farmhouse sink?

Yes. Apron-front sinks often have no deck holes, so a wall mount kitchen faucet with sprayer is a common pairing. Choose a spout reach that lands near the drain and decide where the sprayer mounts: on the wall, on the faucet body, or on the counter.

What flow rate should a kitchen faucet meet in the US, and does WaterSense apply?

The federal maximum for kitchen faucets is 2.2 GPM at 60 psi, and California limits kitchen faucets to 1.8 GPM. EPA WaterSense labeling covers bathroom sink faucets rather than kitchen faucets, so check the listed GPM against local requirements.

Do two-handle wall mount faucets meet ADA requirements for a commercial kitchen?

Two handle wall mount faucets with lever handles that operate with one hand and no tight grasping or twisting generally align with ADA operable-parts guidance. Full compliance also depends on sink height, knee clearance, and reach range, so confirm the manufacturer's ADA listing.

What kitchen faucet mounting options work when the sink has no deck holes?

Wall mount is the standard choice, since the faucet installs on the wall and leaves the sink untouched. Other kitchen faucet mounting options, such as deck mount, need holes in the sink or countertop.